In stock

Pin/Pinless Moisture Meter with Temperature and Humidity

Item #
MMH800

Videos:

Pin/Pinless Moisture Meter with Temperature and Humidity

The #MMH800 Pin/Pinless Moisture Meter with Temperature and Humidity is ideal for locating water leaks and measuring the moisture content of drywall, plastered walls, floors and subfloors.

  • Pin-type + non-invasive inductive moisture sensors
  • Two dedicated displays: Moisture percentage, and ambient temperature plus relative humidity (RH)
  • Audible and visual indications of high, medium and low moisture levels
  • °F/°C switch
  • Data hold
  • Auto diagnostic check
  • #PIND4E replacement pins are available
  • The pin cover doubles as a calibration checker
  • Battery charge indication
  • Auto power off
Specifications
  • Moisture measurement ranges: 5 to 50%WME (Wood Moisture Equivalent) for wood; 1.5 to 33% for building materials
  • Moisture measurement accuracy/resolution: ±3% in pin mode/0.1%
  • Temperature measurement range/accuracy: 32° to 140°F (0° to 60°C)/±5.4°F (±3°C)
  • RH measurement range/accuracy: 25 to 95%/±5% below 75%RH; ±10% above 75%
  • Pin length: 0.28 in. (7mm)
  • Display type and size: 99.9 count LCD with 0.56 in. (15mm) high digits
  • Auto power off: After 3 minutes with 0% reading
  • Operating temperature: 32° to 122°F (0° to 50°C) @ <80% RH
  • Weight (without battery): 4 oz. (115g)
  • Power source: "9V" battery (included)
Includes
  • #PIND4E replacement pins
  • Custom hard plastic carrying case
  • Battery
  • 1-year limited warranty
Dimensions
  • 7.13 x 2.17 x 1.57 in. (181 x 55 x 40mm)

⚠ WARNING: This product can expose you to chemicals including di2-ethylhexylphthalate (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

FAQ - Moisture Meters
FAQ - Moisture Meters
To Top